Office Interiors in Abids, Hyderabad
Office Interiors Above the Abids Shopfronts
A first floor over a shop front near the GPO stretch, a staircase that turns twice, flats above sharing your risers, and a lane no goods vehicle is getting down: that is the ordinary shape of an office floor in Abids, and it is why the route in is solved before the layout is. Panels get sized for the tightest turn on that stair, anything passing through a shaft is cleared with the building side, and the joinery is drawn for a shell where nothing is quite square.
Abids, Hyderabad 500001
Office Interiors in Abids
Tell us about the space and we will come out to Abids for a free site visit, then quote it line by line.
What Careful Planning Fixes On A Central Floor
An older commercial storey rarely cooperates, so the floor levels, the shaft positions and the void a false ceiling actually has to work within are all confirmed before a single sheet of board is ordered.
Sized For The Stair Turn
Partitions, worktops and shutters are specified in sections that clear the narrowest point of your staircase, so nothing reaches the lane and has to be cut down on the pavement.
Shafts Settled With The Building
Where flats above share your risers, the routes for ducting, cabling and fire provision are agreed with the building side before any of it is boxed in.
Joinery Scribed To The Shell
Walls out of true, reveals of three different depths and a leaning column are normal at this address, so carcasses are scribed to fit rather than packed out with a strip of filler.
Level Underfoot
Step changes and patched sections left by earlier tenants are levelled or resolved deliberately, because a floor that catches people out is not something a good finish hides.
A Door You Control
A central address sends public footfall up the same stair, so a lockable landing door and a considered arrival point decide who reaches your desks and when they can.
Three Rooms, One Office
Floors here are often let as separate rooms taken at different times, and one ceiling line, one floor finish and one lighting rhythm make them read as a single company.
How We Work On An Abids Upper Floor
- Measured Twice On Site
- Dimensions are taken on your slab and taken again after the strip out, since what an old ceiling and a plaster line were concealing changes the numbers more often than not.
- Carry In Priced Openly
- Staging, portering and the extra jointing a narrow stair forces on the design appear as their own lines in the itemised quote, not folded quietly into a carpentry rate.
- Old Circuits Checked
- Existing wiring and earthing are inspected before a ceiling or a dado closes, because finding a perished run later means opening up work that was finished a fortnight ago.
- Debris Out The Same Way
- Waste leaves by the route material came in, bagged and timed, so the shop below and the households above are not stepping over your fit out for a week.
- Hours Cleared With Everyone
- Keys, the watchman, use of the lift and the hours in which drilling is acceptable are agreed with the building and the neighbouring tenants before a schedule is issued.
Abids Office Interiors: What Clients Ask
There are flats above our Abids floor. Does that limit what we can do?
It affects the services more than the layout. Shared risers mean any duct, cable or fire provision passing through them is cleared with the building side first, and drilling hours are set so the households above are not living over a hammer drill all evening. None of that prevents a proper fit out, it only has to be sequenced honestly.
The lane will not take a goods vehicle. How does material get up to us?
We fix a staging point near the address and carry material up in sections sized at the drawing stage for your stair turn and your doorway. The joints are then deliberate and placed where they read as a detail, instead of landing wherever a panel happened to jam on the way up.
Our building is old and nothing is square. Do you work from the landlord plan?
No, we work from the building. The plan is useful for orientation and little else, so every wall, reveal and level is measured on site and measured again once the old finishes come off. Joinery is then made to those figures, which is why it sits tight to the wall rather than showing a gap along one end.
Bring Us Up To Your Abids Floor
Send us the address, the storey and a rough headcount, and we will come across from Ambedkar Statue in Narsingi, about 15 km away, to look at the stair, the shell and the shafts. We cover Abids along with Kachiguda and Uppuguda, the visit is free and the quote that follows is itemised. Call +91 79892 32675.
Tell us about your space
Send the form and we will call you back to arrange a free site visit, or just pick up the phone. The consultation, the measurement and the quote cost nothing.
- Call the studio
- +91 79892 32675
- Visit
- Ambedkar Statue, Narsingi
Hyderabad, Telangana 500075 - Open
- Monday to Sunday, 9:00 AM to 8:00 PM