Custom Sofas in Begumpet, Hyderabad
Custom Sofas for Narrow Begumpet Drawing Rooms
Narrow is the word for most of the mid century drawing rooms around Begumpet: the front door at one end, a window or a deep balcony at the other, and a route between them that a catalogue depth turns into a squeeze. So depth here is decided by what has to pass behind the sofa, the arm is kept low and open so the room still looks its width from the door, and the timber is seasoned for the sticky weeks before the rains.
Begumpet, Hyderabad 500016
Custom Sofas in Begumpet
Tell us about the space and we will come out to Begumpet for a free site visit, then quote it line by line.
What Changes When Depth Is Decided Before Style
A good deal of the seating in these blocks was inherited, so many households reach us first about sofa repair and then decide that a frame drawn for the room beats reviving one that never suited it.
Length to the Long Wall
The run is set against the wall the sofa lives on with the swing of the entrance door measured in, so nothing catches as that door comes round.
Two People Pass Behind
Seat depth is trimmed until two people can walk past the back without turning sideways, which in a room this shape is worth more than the extra inches would have given you.
A Low, Open Arm
The arm is drawn low and left open rather than built up as a solid block, so the eye carries across the room from the entrance and the space keeps its width.
Timber Given Time
Frame stock is seasoned and left to settle before it is cut, because the humid stretch before the rains reach central Hyderabad is what finds out a joint made in a hurry.
Back Angle for Long Evenings
The recline of the back is set to the way you actually sit of an evening, upright with a plate or tipped back with the television on, rather than to a fixed factory angle.
Judged at Your Own Hour
Swatches stay in the room and are looked at when you use it, since a deep balcony holds back the morning light and hands the room over to lamps by seven.
Why Begumpet Households Have the Sofa Made
- A Free Visit and Clear Lines
- We take the room ourselves at no cost, and the itemised quote comes back with timber, suspension, foam and cloth priced apart so that nothing hides inside a total.
- After the Services, Not Before
- These buildings are usually sound in the bones and dated in the wiring, so where electrical and ceiling work is still pending the upholstery is programmed to follow it.
- Cloth Chosen Under New Light
- Fabric is settled once the new fittings are switched on, because a shade agreed under a bare bulb and the same shade under warm downlights are not the same colour.
- One Roll, One Cutting Plan
- Arm, back and seat panels are cut from a single roll to a plan, so grain and shade run continuously instead of changing halfway along the sofa.
- A Trial Cushion Stays
- One finished seat cushion is left with you for a week before the rest are filled, which is the only honest way to find out whether a density suits your evenings.
Custom Sofa Questions From Begumpet Clients
Our Begumpet drawing room is narrow. How much depth do we actually give up?
Less than you fear, because the depth you sit in and the depth the sofa occupies are not the same number. A slimmer back build and a tighter cushion can hand back a few inches of floor without shortening the seat you use, and a low open arm buys the rest visually. We measure the walkway you need first and work the depth back from that figure.
Should the sofa wait until the wiring and the ceiling work are done?
If that work is going ahead, yes. Dust off chased walls and a drilled ceiling finds upholstery and stays in it, and the lighting is what you will end up judging the cloth under. Give us the programme at the visit and we measure now, hold the fabric decision until the fittings are live, and build to land after the mess.
Does the humidity here affect a new sofa?
It affects timber far more than cloth. Stock that has not been seasoned takes up moisture in the weeks before the rains and gives it back afterwards, which is how a joint made tight in April works loose by September. We season and settle the stock before it is cut, and the frame is assembled dry and checked for movement before any foam goes near it.
Measure the Walkway, Then the Sofa
Send us an address and we will come in from Narsingi, take the drawing room and the door swing, pace the route behind the sofa with you, and leave swatches to look at under your own lamps. The visit is free and the quote is itemised. Ring +91 79892 32675 to pick a time.
Tell us about your space
Send the form and we will call you back to arrange a free site visit, or just pick up the phone. The consultation, the measurement and the quote cost nothing.
- Call the studio
- +91 79892 32675
- Visit
- Ambedkar Statue, Narsingi
Hyderabad, Telangana 500075 - Open
- Monday to Sunday, 9:00 AM to 8:00 PM