Custom Sofas in Golconda, Hyderabad
Custom Sofas for Older Golconda Houses
Old masonry does not behave like a new block wall. The plaster runs out towards one end, the floor lies a little off level, and there is nothing behind the render worth hanging furniture on, which is why so many sofas look wrong the day they arrive in an older house near the fort. We start from those three facts in Golconda, measuring the wall at more than one height, packing the legs to the floor as it actually lies, and keeping the whole piece free standing so nothing is fixed into render that will not hold it.
Golconda, Hyderabad 500020
Custom Sofas in Golconda
Tell us about the space and we will come out to Golconda for a free site visit, then quote it line by line.
What a Built Sofa Solves in an Old House
Many houses here have had the same seating patched for years, so it is worth being plain about where sofa repair stops being the better answer and a frame built for the room starts.
Joints Cut and Blocked
Seasoned hardwood rails, cut joints and corner blocks are what let a frame carry a full room of visitors for years without working loose at the arms.
Colour Judged in a Deep Reveal
Swatches are seen in the room itself, because a deep window reveal in a thick wall throws light in a narrow band and turns showroom colours into something else entirely.
Free Standing, Nothing Fixed
Nothing is anchored into old render. The frame carries itself and is packed slightly off the wall where the plaster bellies, so the line reads as a decision rather than a gap.
Back Held Under the Sill
Back height is kept below the window recess it sits beneath, so the sill stays usable and the light coming through that deep opening is not cut off at shoulder level.
Made to Be Shifted for a Function
The hall gets cleared when the family has an occasion, so weight is kept sensible and the feet are faced to be pushed across old flooring without scarring it.
Shaped for a Room That Runs Long
A long narrow hall takes a sofa with a short return better than one enormous three seater, which is the usual mistake and the reason the middle of the room ends up unusable.
How We Approach Masonry and Old Floors
- Measured After the Plaster
- Every dimension comes off the finished wall at seat height and at back height, not from a plan, because the room a builder drew and the room a mason left are two different sizes here.
- Legs Packed to the Floor
- Old stone and tile floors are rarely flat, so leg lengths are adjusted on site until the frame sits without rock, which is what stops joints from working loose in the first year.
- Timber Left to Settle
- Boards sit in the workshop through a damp spell before they are jointed, so the moving and settling happen on our bench instead of in your hall once the cover is on.
- Fittings That Cannot Move
- The swing hooks in the ceiling, the shuttered niche and the doorway everyone walks through are all on the drawing before a size is settled, since none of the three is going anywhere.
- Felt Wrapped Over the Foam
- A layer of cotton felt goes over the foam before the cover, which stops the cloth abrading against foam and keeps the arms from going hollow where hands rest.
Golconda Questions About Old Walls
Our walls are thick with uneven plaster. Will the sofa sit flush against them?
We measure the wall at seat height, at back height and at both ends rather than taking one figure, then hold the sofa off the worst of the belly. Nothing is fixed into the render, which would not hold a fixing anyway, so the piece stands on its own and the shadow line behind it looks intended.
The floor in the hall is old and not level. Will the sofa rock?
Not once the legs are packed. We level the frame in position on fitting day and adjust the leg lengths until it sits dead still, because a frame that rocks is a frame that loosens. On badly uneven floors we keep the leg footprint small so there are fewer points to level.
We clear the hall for functions. Will moving the sofa damage it?
It should not, provided it was built knowing that. We keep the weight reasonable, avoid a frame that depends on being pushed against a wall, and face the feet so they slide across old flooring rather than digging into it. The almirah and anything else that is not moving is on the drawing too.
Let Us Read the Wall First
Before any timber is bought we would rather stand in the room, tap the wall, put a level on the floor and take the openings ourselves. Call +91 79892 32675 and we will come out from Narsingi for a free visit, and the quote will name the timber and the foam grade so you can compare it with anyone else.
Tell us about your space
Send the form and we will call you back to arrange a free site visit, or just pick up the phone. The consultation, the measurement and the quote cost nothing.
- Call the studio
- +91 79892 32675
- Visit
- Ambedkar Statue, Narsingi
Hyderabad, Telangana 500075 - Open
- Monday to Sunday, 9:00 AM to 8:00 PM