Custom Sofas in LB Nagar, Hyderabad
Custom Sofas Sized First in an LB Nagar Fit Out
In a whole flat done at once, the sofa is usually chosen last and suffers for it. The TV unit has claimed its wall, the false ceiling has fixed the lights and the sockets are already plastered in, so the seating inherits whatever gap is left over. Around LB Nagar most of our work is exactly that sort of full fit out, so we run it the other way round: the sofa is sized on the first visit, and the carpentry, the lighting and the plug points are set around it.
LB Nagar, Hyderabad 500074
Custom Sofas in LB Nagar
Tell us about the space and we will come out to LB Nagar for a free site visit, then quote it line by line.
What You Get by Sizing the Sofa First
Plenty of what arrives as a sofa repair job here began as a set bought at the end of a fit out, too deep or too long for the space the carpentry had left, so here is what sizing it first prevents.
Carpentry Set Around It
Once the sofa length and depth are fixed, the TV unit depth, the console and the shoe cabinet can be drawn to leave a walkway that still works when somebody is sitting down.
Sockets Where You Need Them
Plug points for the side lamp and the phone charger are marked against the finished sofa position, before the wall is closed and painted, instead of ending up behind a back cushion.
Distance To The Screen
Seat depth and the setback from the wall are worked against where the television is going, so nobody sits too close and nobody has to lean forward to see it.
Sit Upright Or Lounge
How you actually sit, upright with a plate or stretched out for a film, decides the seat angle and the fill firmness, and those are two genuinely different builds.
Spend Staged Across The Flat
Frame, fill, cover and finishing are priced apart, so the sofa can be built on a good frame now in a simpler cover and recovered later without anything else being touched.
Size Early, Cover Late
The dimensions are locked on the first visit and the cover is chosen after the walls are painted, since that is the only point at which a colour can be judged against the finished room.
How We Sequence Sofa Work in LB Nagar
- One Trade, One Sequence
- Because the carpentry and the seating come off the same job, the sofa is made to the sizes the site has actually reached, not to a drawing that has changed twice since.
- Spare Metres Kept Back
- A little of the chosen cover is set aside with the flat's papers, so the arm that takes the most wear can be recovered years later from the same run instead of a near match.
- Delivered Into A Finished Flat
- Seating goes in once the painters have left, over covered flooring and with the lift protected, so the last week of a fit out is not spent cleaning up after the furniture.
- Route Checked Once, Early
- Lift, doors and landing are measured on the same visit as the walls, so the piece is drawn whole or in sections from the start rather than reworked when the site is nearly done.
- Learned From What Fails
- We also take on seating that has already given way, so we know which joints, spans and fills go first, and the new build is drawn against that list.
LB Nagar Custom Sofa Questions
We are doing the whole LB Nagar flat at once. When should the sofa be decided?
Size it on the first visit and choose the cover last. The length, the depth and the setback decide how deep the TV unit can be, where a socket belongs and how much walkway survives, and all of that gets built into walls that are hard to change later. The cover can wait for the painting to finish.
Can the sofa be built to a lower budget now and upgraded later?
Up to a point, and the sensible split is to spend on the frame and the suspension now and take the saving on the cover. Those sit on separate lines, so you can see what each costs. A good frame can be recovered years on, while a weak frame under an expensive cover is money going the wrong way round.
The lift in our building is small. Does that change the sofa we can have?
It changes how it is made rather than how big it is. We measure the lift car, your door and the landing turn while the flat is still bare, then either keep the largest section under those numbers or build the piece as separate seats that make the same run once they are placed together.
Book the Measure Before the Carpentry
If your flat is still bare, that is the best moment to call. We will come across from the studio at Ambedkar Statue in Narsingi, measure the walls, agree the sofa size while the carpentry can still move around it, and leave the cover decision until the painting is done. The visit is free. Call +91 79892 32675. The same run takes in Uppal, Nacharam and Abids.
Tell us about your space
Send the form and we will call you back to arrange a free site visit, or just pick up the phone. The consultation, the measurement and the quote cost nothing.
- Call the studio
- +91 79892 32675
- Visit
- Ambedkar Statue, Narsingi
Hyderabad, Telangana 500075 - Open
- Monday to Sunday, 9:00 AM to 8:00 PM