Modular Kitchen in Nallagandla, Hyderabad
Individual Modular Kitchens In Identical Nallagandla Shells
Walk three flats on one floor and you meet the same kitchen three times: platform on the same wall, window in the same place, water line surfacing in the same corner. That is the honest starting point in Nallagandla, where whole blocks were handed over to a single drawing. The shell repeats and the households do not, so the work is not in moving anything. It is in the depths, the fittings and the light, which is where two identical rooms stop resembling each other.
Nallagandla, Hyderabad 500019
Modular Kitchen in Nallagandla
Tell us about the space and we will come out to Nallagandla for a free site visit, then quote it line by line.
Where The Gain Actually Comes From
Nothing here is knocked through, so the gain comes from what goes inside the boxes, what the lighting does, and how much depth the false ceiling leaves you under a slab your whole block shares.
Depths Cut To Your Vessels
Rather than the drawer sizes every flat on the floor was offered, the banks are drawn to the steel and the provisions you own, counted on the visit, which is where two identical shells begin to diverge.
Light Where The Work Is
Strips under the wall units and a switched line inside the tall unit put light on the board you chop at, so you are not working in the shadow your own cabinets throw across the one window.
The Wet Run Built Apart
The stretch under the sink and around the utility tap is built in moisture resistant board with every cut edge sealed, because that is the one length of a kitchen here that never fully dries.
The Shaft Stays Openable
The service shaft door and the valves behind it stay reachable through a panel that lifts off, since the day a riser needs attention the plumber should not be cutting through your new joinery.
A Finish The Floor Has Not Seen
Shutter tone, handle metal and the counter are chosen to suit your flat instead of the show unit everyone on this floor was walked through, which is the simplest way out of looking standard issue.
Fittings Named Bank By Bank
Channels, hinges and pull outs are specified where the traffic is rather than sold as one package, so the drawer you open hourly gets the good mechanism and the loft above does not carry it for nothing.
How A Nallagandla Kitchen Gets Planned
- Your Walls, Not The Plan
- Two flats built to one drawing still differ by a few millimetres of plaster and floor level, so the tape comes out in your room and the run is cut to your walls rather than to the plan the block was sold on.
- The Fixed Points Accepted
- Where the water, the waste and the window already sit is treated as the frame of the job, since moving them in a recent tower means chasing structure and asking for permissions rarely worth the gain.
- Your Storage Counted First
- Before a layout is drawn we go through what has to live in the room, from the number of large vessels to the appliances and the monthly grocery load, because that list is what turns a standard shell into your kitchen.
- Seen Before It Is Cut
- You get elevations of the room as you will see it from the doorway, with the heights and widths written on, and nothing leaves for cutting until you have said yes to that view.
- A Record Of What Went In
- The boards, channels and hinges used in each bank are written down and handed over with the kitchen, so a replacement years from now matches what is already there instead of being guessed at.
What Nallagandla Owners Ask Us
Every flat on our floor has the same kitchen. Can ours actually feel like ours?
Yes, because the parts you live with daily are the parts that change. Drawer depths, what the tall unit holds, the shutter tone, the counter and where the light lands are all yours to decide, and the shell sets none of them. Drawn around what you cook and how much you store, the finished room reads nothing like the identical one next door.
What will the association let us change in the kitchen?
Usually anything inside the flat, and rarely anything touching the external face, the shaft or the common plumbing. We ask at the office before drawing rather than after, so the layout stands on what is actually permitted, and the work is done inside the hours and the lift booking your block allows.
Several flats on our floor are being fitted out at once. Does that hold our kitchen up?
It can, and it is a scheduling problem rather than a building one. One service lift and one loading bay serving several fit outs means deliveries have to be booked, so the kitchen comes in fewer and larger loads and is assembled inside the flat. Those dates are agreed with the office before fabrication starts, so your slot is held.
Get Your Nallagandla Kitchen Measured
Give us the block and the tower and we will turn up with a tape and a notebook. The vessels get counted, the room gets measured, and the quote that follows names every bank and every fitting on a line of its own. Our studio is at Ambedkar Statue in Narsingi and the visit costs you nothing. Call +91 79892 32675.
Tell us about your space
Send the form and we will call you back to arrange a free site visit, or just pick up the phone. The consultation, the measurement and the quote cost nothing.
- Call the studio
- +91 79892 32675
- Visit
- Ambedkar Statue, Narsingi
Hyderabad, Telangana 500075 - Open
- Monday to Sunday, 9:00 AM to 8:00 PM