Custom Sofas in Jubilee Hills, Hyderabad
Custom Sofas Drawn for Jubilee Hills Volumes
A sofa in a double height room is looked at long before it is sat on, from the landing above, from the entrance, and down the length of the sight line. In Jubilee Hills the floor area is rarely the constraint and the volume always is, so a piece pushed back against a wall the way a small room demands leaves the middle of the plan empty. These are usually drawn standing free instead, with a back worth seeing and a shape that answers the curve of the stair rather than the edge of a catalogue.
Jubilee Hills, Hyderabad 500033
Custom Sofas in Jubilee Hills
Tell us about the space and we will come out to Jubilee Hills for a free site visit, then quote it line by line.
What a Sofa Drawn for the Volume Gives You
Owners here often reach us with a set worth keeping, so a conversation that opens with sofa repair can end with one piece restored and one newly made, and the money going where the room genuinely needs it.
A Back Worth Seeing
Where the piece floats in the plan, the back is built and covered to the same standard as the front, because that is the side the entrance and the landing look at.
Curves If The Plan Asks
A radiused back or a soft serpentine front is shaped on a laminated frame rather than faked with cushions, which is how a sofa answers a curved stair instead of fighting it.
Two Groups, One Room
Volume on this scale usually wants a main seating group and a smaller second one, so the pieces are drawn as a family, sharing arm heights and differing in footprint.
Read From The Landing
Back height and arm mass are set by how the piece reads from above as much as from the seat opposite, so it does not flatten into the floor when seen from the first floor.
Dressed, Not Piled
Loose cushion sizes, counts and fills are drawn with the piece, so the sofa looks finished the day it lands rather than waiting for a shopping trip to rescue it.
Through The Gate And The Turn
Gate width, the porch, the main door and the first turn of the stair decide whether a long piece arrives whole or in two halves joined where nobody looks.
Why Jubilee Hills Houses Have Seating Made
- Drawn Before It Is Priced
- You see the piece drawn against your own room, in plan and in elevation, before a number is attached to it, because at this scale a sentence of description is not enough to agree on.
- Stone, Veneer And Metal Matched
- Leg finish and stitch detail are picked against the marble, the veneer and the metal already in the room, usually with your architect or designer in the conversation.
- Sight Lines Walked
- We walk the entrance line, the stair and the route to the terrace with you, since a piece that works in plan can still close a view the house was designed around.
- Long Runs Braced
- A seat that runs far with no leg under the middle gets a deeper rail and extra blocking, which is what keeps a long piece from developing a dip where everyone sits.
- Second Visit Expected
- A commission this size takes more than one visit, so we plan on returning with revised drawings and further samples instead of asking you to decide everything in an afternoon.
Jubilee Hills Custom Sofa Questions
Our Jubilee Hills living room is double height. Should the sofa sit against the wall?
Often not. Pushing a piece to the wall in a tall room empties the middle of the plan and makes the sofa look smaller than it is. We usually draw the seating standing free with the back finished, so the group holds the centre and the wall carries something else. That is decided on the drawing, before anything is made.
Can you make a curved sofa for a room with a curved staircase?
Yes. Curved backs and fronts are shaped on a laminated frame, which holds its line far better than a straight frame dressed in cushions to look round. We take the radius off the stair and the floor pattern on site, then draw the curve to that rather than to a standard.
Will a large one piece sofa get into an independent house here?
That rests on the gate, the porch, the main door and the first turn of the stair, all measured before the frame is made. Where a single body cannot make the turn we split it at a seat division or an arm, so the join falls where the eye does not go and it closes up inside the room.
Start With the Drawing, Not the Price
Ask us out and we will measure the room, walk the sight lines, and come back with the piece drawn against your own walls before any figure is discussed. Bring your architect or designer into that visit if one is involved. The first visit costs nothing. Call +91 79892 32675. We work across Jubilee Hills and neighbouring Somajiguda, Khairatabad and Madhapur.
Tell us about your space
Send the form and we will call you back to arrange a free site visit, or just pick up the phone. The consultation, the measurement and the quote cost nothing.
- Call the studio
- +91 79892 32675
- Visit
- Ambedkar Statue, Narsingi
Hyderabad, Telangana 500075 - Open
- Monday to Sunday, 9:00 AM to 8:00 PM