Sofa Repair in Secunderabad, Hyderabad
Sofa Repair in Secunderabad for Older Frames
Rooms with this much height above them were furnished with seating built to match, and a great deal of it is still in daily use across Secunderabad. Settees with a stitched edge along the seat, suites with a chair either side, arms rolled over timber and tacked rather than stapled. A piece like that is no candidate for the quickest recover in town: strip it carelessly and the shape it was built to hold never comes back. Worked the way it was made, it takes longer on the bench and leaves you with the same sofa, not a modern one wearing old wood. Our studio at Ambedkar Statue in Narsingi is about eighteen kilometres south, and coming up to look at it costs you nothing.
Secunderabad, Hyderabad 500003
Sofa Repair in Secunderabad
Tell us about the space and we will come out to Secunderabad for a free site visit, then quote it line by line.
What Restoring an Older Suite Returns
A frame cut for a tall room usually earns its bench time, and only when the timber itself has given up do we make the case for custom sofas drawn to the same depth and the same low arm, because very little on a showroom floor is built for a room shaped like yours.
Joints Clamped And Pinned
Corner blocks and mortices that have opened are cleaned of old glue, drawn back square under clamps and pinned, so the creak that carries across a tall room stops.
Old Filling Taken Out
Years of dust leave with the original coir and fibre, because there is no sense closing fresh covering over filling that puffs grey each time somebody sits down.
Buttoning And Piping Redone
Deep buttoning, welted seams and a piped arm go back as they were rather than being simplified away, since those details are most of what the piece is.
Arms Rebuilt, Not Padded
Arm tops that have gone hollow are built up from the frame out, instead of having a layer of foam laid over the dip and a cover pulled across it.
Proportion Held
Depth, seat height and arm line stay where the maker set them, so the piece still suits a room with air above it and does not return looking inflated.
The Suite Kept Together
Settee and chairs are worked as one job, which is the only reliable way to be sure the set still reads as a set when the last piece comes home.
How We Handle Cantonment Era Seating
- The Old Cover Is The Pattern
- Panels are unpicked, labelled and used as templates for the new ones, which is how a shape somebody once cut by hand gets cut correctly a second time.
- Pictures Off The Bench
- Once the piece is stripped you get photographs of the bare frame and of whatever was found inside it, so the rebuild is agreed on evidence instead of on a description.
- Old Methods Where They Belong
- Hessian, coir and a stitched edge go back into a frame built for them, rather than a slab of foam that would sit proud of the rails and lose the line.
- Damp Taken Seriously
- Where seating has stood against an outer wall through a few monsoons, the back rails and the filling are checked for mildew before anything new is fitted.
- Pattern Centred By Hand
- On a long settee a stripe or a woven motif is centred on the seat and carried through to the outside arm, which is a decision made while cutting, not while stitching.
Older Sofas in Secunderabad: Your Questions
Will our old settee come back as a modern foam sofa?
Not unless you ask for that. Where a frame was built for hessian, coir and a stitched edge, that is what goes back into it, with the original panels unpicked and used as patterns. A foam slab dropped into a frame like that stands proud of the rails and changes the whole line of the piece, which is why we avoid it.
We have a settee and two chairs. Do they have to be done together?
They do not, but one job is the only way to be certain of the colour, because two dye lots of the same cloth rarely agree under the strong side light these rooms get. If one piece at a time suits you better, we will say plainly that a later match may sit slightly off, and let you decide with that in front of you.
How is the firmness decided? We do not want it hard as a bench.
We ask how the seat felt when it was right and build towards that rather than to a house standard. The filling goes in, gets sat on and is adjusted before any covering is fitted, so what you approve is a feel you have tried rather than a grade written on a page.
Bring Us to the Settee
Send a picture of the arm, the seat and, if you can tilt it, the underside, and tell us what the piece does now that it did not do before. We will drive up from Narsingi, look at the frame, and set out bench work, filling and covering separately so you can see where the time actually goes. Call +91 79892 32675 and the visit is on us.
Tell us about your space
Send the form and we will call you back to arrange a free site visit, or just pick up the phone. The consultation, the measurement and the quote cost nothing.
- Call the studio
- +91 79892 32675
- Visit
- Ambedkar Statue, Narsingi
Hyderabad, Telangana 500075 - Open
- Monday to Sunday, 9:00 AM to 8:00 PM