Modular Kitchen in Sun City, Hyderabad
Modular Kitchen for Sun City, Drawn Once and Built in Stages
The kitchen is usually the room that waits. Bedrooms get finished, the cooking end is left for a later phase, and by then the tap positions and the window reveal have quietly decided half the layout. That is the order we walk into most often in Sun City, where independent houses and gated blocks out past Golconda are finished room by room as budget allows. So the kitchen is designed in full at the start and only then broken into stages, which is the one way the second stage meets the first without looking like a repair.
Sun City, Hyderabad 500008
Modular Kitchen in Sun City
Tell us about the space and we will come out to Sun City for a free site visit, then quote it line by line.
Six Things A Staged Plan Settles Early
Planning the whole kitchen before the first stage is built means the duct, the light points and the false ceiling above the counter are all set in one drawing, instead of being reopened a year later when the next stage is funded.
Drawn Once, Built In Stages
The whole kitchen is designed at the start and then split into stages you can fund, so nothing is bought twice and no decision is taken under pressure.
Points Left For Later Appliances
The hob cut, the oven housing and the fridge gap are set in the drawing now, with the water and power points left ready, even if those appliances arrive much later.
Counter Height To The Cook
Counter height, sink depth and the reach across the working triangle are set from the person who cooks most, which is the one thing no catalogue can decide.
Counter Joints Placed Dry
Stone joints and the sink cut are positioned away from the wet edge and the hob, so water is never left standing on the weakest line of the counter.
Cylinder Out Of The Way
The cylinder bay, the pipe run and the shut off valve get a planned place with air around them, instead of the cylinder living wherever the last cabinet left room.
Hood Or Exhaust, Decided Honestly
Whether a ducted hood or a wall exhaust suits the house is settled by where an outside face can actually be reached, not by which one sells better.
How We Work On A Kitchen Built In Phases
- Stage Two Meets Stage One
- The break between phases falls at a joint we choose in the drawing, so units added later read as part of the same kitchen rather than as a patch on the end.
- Priced Stage By Stage
- The quote separates each stage and each item inside it, which is what lets you move a tall unit or the chimney to a later date with your eyes open.
- We Come Back Between Stages
- Before each new stage someone rechecks the room, because a house still being finished moves on: a floor gets laid, a door gets hung, a point gets shifted.
- Finishes Recorded For Later
- Board grade, shutter finish and hardware are written down against your file, so a later stage can be matched instead of guessed at from memory.
- You Keep The Drawing
- The full layout stays with you, so whoever is on site for the next stage works to the same plan rather than to whatever anyone happens to remember.
Sun City Modular Kitchen Questions
Can a modular kitchen in Sun City be done in stages while the rest of the house waits?
Yes, and it is the usual pattern here. We draw the complete kitchen first, then split it so the carcass, the counter and the storage you cannot manage without go in now, while extra units, internal organisers or a chimney upgrade follow later. The quote lists each stage on its own so you decide what waits.
We have not bought the chimney or the oven yet. Can the kitchen be built around appliances we do not own?
It can, as long as the sizes are agreed now rather than later. We set the housing, the cut and the clearances to the dimensions you intend to buy within, leave the water and power points capped and labelled behind an access panel, and note those assumptions in writing. If you then choose something outside them, you know before you buy it.
Will the finishes still match when we build the second stage?
They match far better when the first stage is documented. Board grade, edge banding, shutter finish and hardware all go on record against your file, and a sample of the shutter and the counter is kept with the drawing. Where something is no longer available, we say so at the time and suggest where a deliberate change of material reads better than a near miss.
Start At The Wall, Not The Catalogue
Tell us the address in Sun City and we will come out, measure the wet line, the window and the real ceiling height, then talk through what the first stage should sensibly cover. The visit is free, and the quote that follows is split by stage and by item so nothing hides inside a lump figure. Call +91 79892 32675.
Tell us about your space
Send the form and we will call you back to arrange a free site visit, or just pick up the phone. The consultation, the measurement and the quote cost nothing.
- Call the studio
- +91 79892 32675
- Visit
- Ambedkar Statue, Narsingi
Hyderabad, Telangana 500075 - Open
- Monday to Sunday, 9:00 AM to 8:00 PM